New MAXX CNC Aluminum Hopup Chamber ME - PRO View larger

MAXX CNC Aluminum Hopup Chamber ME - PRO

AIR-MX-HOP005PRO

New product

MAXX CNC Aluminum Hopup Chamber ME - PRO

More details

2 Items

In stock with us

Warning: Last items in stock!

R1,100.00 tax incl.

More info

Product Information

CNC Aluminum Hopup Chamber ME Pro (with BB Latching System) unit is precisely made to improve accuracy and ensure consistent air seal for Tokyo Marui (include KRYTAC, except KWA) M4/M16 Standard AEG series.
The Hopup Chamber ME unit has a precision rotary dial design for fine hopup adjustments, also re-engineered the hopup levers and concave nubs to work best with R-hop, Flat-Hop and Standard-Hop to keep the BBs shooting straight and accurate on every single shot.
The Hopup Chamber ME unit is designed to accept the nozzle length from 21.00mm to 21.25mm, and fully compatible with most aftermarket soft and hard rubber bucking without losing FPS or dropping BBs.
The Hopup Chamber ME Housing is equipped with a new CNC Delrin Locking C-Clip design to hold barrel tight without wobbling and twisting, and 3 compression springs on top, at bottom and in center of housing to ensure the hopup unit is exactly centered, straight and air tight at all times when adapted to any V2 gear boxes with 11mm or 11.5mm inner bore.
More than that, the Hopup Chamber ME Pro unit is specially designed with BB Latching System to prevent dropping BBs after removing the magazine. The Latching System can be also manually opened to release BBs from inside hopup chamber by hand.

***The UV LED Tracer and Electronic Module are optional add-ons to glow BBs in the dark. Operating Voltage from 7VDC - 15VDC (2-4 cells LiPo, 6-13 cells NiCad). (Sold separately)
***The Empty Magazine Detection Sensor and Electronic Switch Controller are optional add-ons to stop Motor/HPA firing when the magazine is empty. (Sold separately)
***Test results: FPS might be increased from 10FPS to 30FPS over stock setup. Please check your FPS!

 

 Includes
product_right_arrow.png1 x CNC Aluminum Hopup Chamber ME Pro (with BB Latching System) unit
product_right_arrow.png2 x Strong Clear Vinyl Cover
product_right_arrow.png1 x CNC Aluminum Standard-Hop Arm
product_right_arrow.png1 x CNC Aluminum R-Hop Arm
product_right_arrow.png1 x Silicone Rubber Standard-Hop Nub Damper
product_right_arrow.png1 x Silicone Rubber R-Hop Nub Damper
product_right_arrow.png1 x CNC Aluminum 4.5mm length Precision R-Hop Concave Nub
product_right_arrow.png1 x CNC Aluminum 6mm length Precision R-Hop Concave Nub
product_right_arrow.png1 x CNC Brass Threaded Slot Pin
product_right_arrow.png1 x CNC Delrin Locking C-Clip
product_right_arrow.png1 x CNC Barrel Brass Spacer
product_right_arrow.png1 x Brass Spacer Holder Oring
product_right_arrow.png3 x Steel Compression Spring

 

 Specification
product_right_arrow.pngOverall Length: 51mm
product_right_arrow.pngOverall Height: 37.75mm
product_right_arrow.pngHub Outer Diameter (to fit into Gear Box): min 11mm - max 11.5mm
product_right_arrow.pngHub Outer Diameter (to fit into Outer Barrel): min 12mm
product_right_arrow.pngHub Inner Diameter (to fit Nozzle): max 8.3mm
product_right_arrow.pngFeeder Outer Diameter (to fit magazine): min 9.25mm
product_right_arrow.pngFeeder Length (to fit magazine): max 6.25mm
product_right_arrow.pngMaterial: Aluminum 6061

 

 Features
product_right_arrow.pngMachined from a solid aircraft aluminum block with tight tolerances to provide better accuracy, consistency, and durability
product_right_arrow.pngImproved accuracy and ensure consistent air seal for Tokyo Marui (include KRYTAC, except KWA) M4/M16 Standard AEG series
product_right_arrow.pngPrecision rotary dial design for fine hopup adjustments
product_right_arrow.pngRe-engineered the hopup levers and concave nubs to work best with R-hop, Flat-Hop and Standard-Hop to keep the BBs shooting straight and accurate on every single shot
product_right_arrow.pngRemovable Brass Threaded Slot Pin for setup and maintenance
product_right_arrow.pngAccepted the nozzle length from 21.00mm to 21.25mm
product_right_arrow.pngFully compatible with most aftermarket soft and hard rubber bucking without losing FPS or dropping BBs
product_right_arrow.pngEquipped with a new CNC Delrin Locking C-Clip design to hold barrel tight without wobbling and twisting
product_right_arrow.pngEquipped with 3 compression springs on top, at bottom and in center of housing to ensure the hopup unit is exactly centered, straight and air tight
product_right_arrow.pngCompatible with any V2 gear boxes with 11mm or 11.5mm bore
product_right_arrow.pngSpecially designed with BB Latching System to prevent dropping BBs after removing the magazine
product_right_arrow.pngManually opened to release BBs from inside hopup chamber by hand
product_right_arrow.pngThe UV LED Tracer and Electronic Module to glow BBs in the dark ready!
product_right_arrow.pngThe Empty Magazine Detection Sensor to stop Motor/HPA firing ready!

 

 Weight
product_right_arrow.pngN/A grams

 

 Usage
product_right_arrow.pngCompatible with most Tokyo Marui (include KRYTAC, except KWA) M4/M16 standard AEG version 2 gear box

 

 Requires
product_right_arrow.pngWearing eye protection is recommended
product_right_arrow.pngUse proper tools for disassembly and reassembly the gear box with great care due to spring tension
product_right_arrow.pngBearing lubricant oil/grease is recommended for smooth operation

 

 Instruction
product_right_arrow.pngInstruction Manuals are included

Tokyo Marui® is a registered trademark of Tokyo Marui Co., Ltd.
KRYTAC® is a registered trademark of KRISS Systems SA in the U.S. and other countries.
KWA® is a registered trademark of KWA Performance Industries, Inc.